Supplying power, Charge the battery pack – Panasonic AC Adaptor DE-852D User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Supplying Power
Charge the Battery Pack
1
Connect and plug in the cables as
shown.
• POWER Lamp will light.
• Remove the DC Cable, if attached,
from the adapter.
2
Attach the Battery as shown to charge.
• CHARGE Larpp lights up. It goes out
when charging is complete.
APPROXIMATE CHARGE TIME:
CGR-D16; 2 hours
CGP-D28; 3 hours and 15 min.
3
Remove the Battery.
Slide the Battery out and then lift up.
About the Flashing of the CHARGE Lamp:
• Charge the Battery within an ambient temperature range of 40°F and 86°F (10°C and
SO^C).
• If charging is done in extreme low or high temperatures. Battery charge time increases.
CHARGE Lamp flashes when...
• The Battery is being charged, but charging is taking longer than normal.
• Charging is not possible. Remove the Battery once, wait a short time, then reattach it
for charging.