Set-up features, Set time, Antenna (ant) – Panasonic CT-27G22 User Manual
Page 25: Auto prog, Set-up features set time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set-Up Features
Set Time
Clock (when set) will display on screen at initial ‘Turn On”,
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
1
Press
2. Press ^or^ and or ^ to highlight the Set-Up
Icon.
3. Press to display the Set-Up Menu.
SET-UP
SET TIME
AUTO PROG
MANUAL PROG
•fV"
NO
NO
Vi
AUTO POWER ON
OFF
&
MODE
OFF
^iiMlI’^TESPANOL FRANÇAIS
4. Press‘d or^ to set hours (set AM/PM accordingly).
5. Press ^ to select minutes position.
6. Press or ^ repeatedly to set minutes.
7. Press ^3) twice to exit menus.
Antenna (Ant)
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the Receiver is not connected to
a cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the Receiver is connected to
a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
NOTE: This feature is disabled when Game Guard
Lock is activated.
1.
Press ^3.
2. Press ^or^ and*^ or ^ to highlight the Set-Up
Icon.
3. Press (^3 to display the Set-Up Menu.
SET-UP
SET TIME
- : --
ANT
"" TV
MANÜALPROG
£^N0
AUTO POWER ON
OFF
MODE
OFF
ESPAÑOL FRANÇAIS
4. Press ^ to highlight ANT.
5. Press ^ or ^ to select TV or CABLE.
6. Press ^3 twice to exit menus.
Auto Prog
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
NOTE: This feature is disabled when Game Guard
Lock is activated.
1. Press
2.
Press ^or^ and or ^ to highlight the Set-Up
Icon.
3. Press (^3 to display the Set-Up Menu.
SET-UP
4. Press ^ to highlight AUTO PROG.
5.
Press^ or^ to startAuto Programming. Channels
will automatically advance until all channels have
been scanned.
6.
Press
^3
twice
after
completion
of
Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
-
25
-