Installation (cont.), Antenna/cableconnections, Incoming cable from home antenna – Panasonic CT-27G22 User Manual

Page 6: Incoming cable from cable company, 75 ohm, Other video equipment, Care and cleaning, Picture tube (turn set off), Plastic cabinets, Wood cabinets

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation

(cont.)

Antenna/CableConnections

Antenna Connection - For proper reception of VHF/UHF channels, an external
antenna is required. For best reception an outdoor antenna is recommended.

Antenna Mode must be set to TV. (Refer to Antenna Mode section.)

Incoming Cable from Home Antenna

Indoor

Outdoor

Typical VHF/UHF Antenna

75 Ohm

VHF/UHF

on Back of Set

300 Ohm

VHF/UHF

on Back of Set

or

300 to 75 Ohm Matching
Transformer(Not Supplied)

Cable Connection - For reception of cable channels, connect the cable supplied by your local cable company. Antenna

Mode must be set to CABLE. (Refer to Antenna Mode section.)

Incoming Cable from Cable Company

75 Ohm

VHF/UHF

on Back of Set

NOTE: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A

cable converter box is required for proper reception. Check with your local Cable company for compatibility

requirements.

Other Video Equipment

VCRs, Video Disc Players, Computers, TV games, and DSS equipment can also be connected to the antenna input
connection.

Care and Cleaning

Picture Tube (Turn set off)

Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive
moisture and wipe dry.

Plastic Cabinets

Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.

Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners.

Wood Cabinets

When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of
furniture polish will help preserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not
place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction could result causing

permanent marring of the finish.

Remote Control Transmitter

Do not use benzene, thinners or other petroleum based cleaners to clean the Remote Control Transmitter. To clean,

wipe with a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth.

- 6 -

Advertising