Panasonic KX-F590 - Manual (Page 48)

Advanced Instructions
Voice Contact
You can have a voice conversation on the same call after fax transmission or reception is completed.
This saves the extra expense and time of making a subsequent telephone call to discuss the information
sent over the fax.
Important:
•
This feature works only when the other party’s unit is equipped with the voice contact/call reservation
feature.
Initiating voice contact
Press SP-PHONE/VOICE STDBY while
transmitting or receiving documents.
VOICE STANDBY
—Your unit wiil call the other party with a
distinctive ring.
^ When the other party answers, the unit will
emit a distinctive ring. While ringing, press
SP-PHONE/VOICE STDBY again or lift the
handset to start speaking.
Notes:
• If you initiate voice contact while transmitting
documents, you can speak after alt the
documents have been transmitted.
• If you initiate voice contact white receiving
documents, you can speak after the current page
of the documents is received.
• You can initiate the voice contact by iifting the
handset during transmission or reception.
• if the other party does not answer, the line will be
disconnected automatically.
Receiving a request for voice contact
If the other party initiates voice contact, your unit will emit a distinctive ring after the transmission or
reception is completed.
When a distinctive ring is heard, press SP-PHONE/VOICE STDBY or lift the handset, then start speaking.
Note:
• If you do not answer within 10 seconds of hearing the distinctive ring, the tine will be disconnected
automatically.
48