Connections and dialing mode setting – Panasonic KX-F590 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation and Preparation
Connections and dialing mode setting
H
mm
1. Ensure that the dialing mode selector is set to TONE.
2. Lift the handset or press the SP-PHONE button, then listen for the dial tone.
3. Dial a familiar number.
4. If the call is successful, the unit is connected to a tone exchange. Leave the selector set to TONE.
5. If the call is not successful, the unit is connected to a pulse exchange. Switch the selector to PULSE.
Notes:
•
We recommend the use of an exclusive power outlet to avoid interference from other equipment.
• When you operate this product, the socket outlet should be near the product and be easily accessible.
• The unit will not function during a power failure.
• You can connect an external telephone/answering machine to the unit after peeling off the tape on the
external telephone jack (EXT). When you use with an answering machine, see page 18.
•
For additional equipment protection, we recommend the use of a surge protector. The following type is
available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE
MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).