Cassette tape player basics continued, Dolby noise reduction, Note – Panasonic CQR255SEUC User Manual
Page 14: Blank skip, Notes, Repeat play, Metal tape mode, Cassette tape player basics, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cassette Tape Player Basics
continued
Dolby Noise Reduction
Press 2 (NR) to set the Dolby B NR mode.
□□
To cancel the Dolby NR mode, press the button again.
Note:
Set the Dolby B NR mode when playing back a tape recorded with
Dolby B Noise Reduction.
Blank Skip
Press 5 (B S) to skip long unrecorded portions on the tape.
This is most convenient if you quickly want to skip the remaining
unrecorded pprtions at the end of the tape and fast forward to the begin
ning of the first music on the reverse side of the tape.
To turn it off, press 5 (B S) again.
Notes:
• “B-SKIP” indicator lights. However, the blank skip operation will not
work if REPEAT is on. The repeat function has priority over that of the
blank skip function.
• Also the blank skip operation will not work when the unrecorded por
tion of the tape is less than 15 seconds.
Repeat Play
Press 4 (REP) to repeat the same music you are now listening to.
After finishing the music just listened to, the rewind starts automatically
until the beginning of music, and the same music starts playing again.
To turn it off, press 4 (REP) again.
Metal Tape Mode
Press 1(MTL) when playing metal or chromium dioxide (CrOa) tapes.
To turn it off, press MTL again.
MTL
Note: Playing non-metal tapes in MTL mode causes high frequency
imbalance, which affects tone quality.
14
CQ-R255SEUC