Panasonic CQR255SEUC - Manual (Page 28)

I
Installation Guide
continued
(D Remove the removable face plate by pulling on the right side of the unit. Place the removable face plate in
a supplied case.
Contacts
Fig. 2
Security Indicator
Main Unit
@ As shown in Fig.3, insert the removable face plate
with the arrow pointing toward the removable face
plate case until you hear a “click”. Keep the
removable face plate in the case. Then, you can
bring the plate safely.
(8) Removable Face Plate Case
Set two arrows together. Fig.3
To install the Removable Face Plate
® Slide the left side of the removable face plate in place.
® Press the right end of removable face plate until “click” is heard.
Plastic Tab
Removable
Face Plate
Fig. 5
Cutout
Caution;
1. Before removing the removable face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable face plate on the dashboard or nearby areas where the temperature rises
to high levels.
5. Do not touch the contacts on the removable face plate or on the main unit, since this may result in poor
electrical contacts.
6. If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.
28
CQ-R255SEUC