Panasonic CQ-DF602U - Manual (Page 21)

One-Touch Selection of a Preset Station
Up to 6 stations each can be saved in the FIV11, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manuaiiy save a station in
the preset memory.
© Seiect a band and frequency (steps (JD, ® and ® on the previous
page).
@ Press and hoid [P-SET /\] or [P-SET v]/[/\] or [v] for more than
2 seconds untii the preset number blinks.
@ Press [P-SET /\] or (P-SET v]/[/\] or [v] to seiect a preset num­
ber (1-6).
@ Press and hold [P-SET /\] or [P-SET v]/[/\) or [v] for more than
2 seconds to memorize. ,
__ \ I X
oThe display blinks once, and a re- SSolhaffiS >
ceiving station is saved in the --------------------------:y\----
1
——
Preset number
Note:
® Frequency setting can be performed even after selecting a preset number.
Entering numbers directly on the remote control unit
© Select a band and frequency (step (SD, ® and ® on the previous
page).
@ Press and hold [1] to [6] for more than 2 seconds to memorize.
Auto Preset
Memory (АРМ)
Automatically save rela­
tively strong stations in
the preset memory.
© Select a band (steps ф and ® on Scanning:
the previous page). ^
@ Press and hold [BAND] (АРМ) for
more than 2 seconds.
• The 6 strongest available stations \wi!l be automatically saved in the mem­
ory under preset number 1 to 6 .
©Once set, the preset stations are sequentially scanned for 5 seconds
each. (Scanning)
• Press [P-SET or [P-SET v]/[^] or [ v] for the broadcast you mn\
to listen to.
(Press [11 to [6] on the remote control unit.)
Note:
New stations are overwritten on existing saved stations after following this procedure.
Preset Station
Calling
© Select a band (steps (3) and 0 on the previous page).
Press [P-SET ^1 or [P-SET v]/[/\] or [v] to select the preset
number for tuning in the preset station.
(Press
[ 1 ] to [ 6 ] on the remote control unit.)
GQIDE602U
21