Panasonic SC-CH75 - Manual (Page 32)

Using an external
unit
START/STOP
HEC
Listening to an external source
(See page 7 for external unit connection)
1. Press AUX.
JJJJ JJJJ to / / o
JJJJ
u
_/ 11
The power wilt come on automatically, even if the stereo is on
standby.
2. Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)
Recording from an external source
1. Follow steps 1 -5 on page 20.
2. Press AUX,
3. Press REC START/STOP (recording starts).
4. Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)
To stop recording
1. Press REC START/STOP.
2. Stop the source.
Listening with headphones
Before connecting, reduce the volume.
Connect the headphones to the headphones jack.
Plug type: M3 stereo type
Avoid listening for prolonged periods of time to prevent hearing
damage.
DISPLAVZ-OEMO
O
Changing the output level display
The output level display will change in 3 steps. Select the desired
display.
Press DISPLAY/DEMO.
Each time the button is pressed, the display will change as follows,
M Aurora mode
Normal mode
c
Peak-holding mode
1 ^ [sm
m 11
Demo function
This system comes with a “demo" function. The default setting is for
the demo function to be ON.
Switching the demo function on or off;
Press and hold -DISPLAY/-DEMO for about 2 seconds or more. .
When the demo function is set to on;
• When the power is ON
When the input source is set to “CD" or “TAPE”, the demo function
will run automatically after about 2 minutes or more pass in the stop
mode.
•When the system is in the power standby mode
When you do not set the time, the demo function runs automati­
cally.