Direct programme number selection, Two digit programme number selection – Panasonic TC-W21 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
(The TV set must be turned on.)
How to switch ON or OFF from
STAND-BY mode.
Push this button to turn the TV set
ON from STAND-BY mode.
Push it again to return the TV set
to STAND-BY mode.
Power for the TV is separated
from that for the VCR section.
When the power is switched off
during recording/rewinding, power
for the TV is shut off immediately,
but the power for the VCR is shut
off after compietion of recording/
rewinding.
32
3
4
Programme Number Selection
(Select your desired
programme number)
Push the Programme Number Up
“
a
”
or Down V Button to select
the next higher or lower tuned
channel.
Direct Programme Number
Selection
(Programme Numbers 0-9)
e.g. To select Programme
Number "7”, push the “7”
Button.
Two Digit Programme Number
Selection
e.g. To select Programme
Number “24”;
Push the Button, then
push the “2” Button, and then
push the "4” Button.