Connect the plug to the wall outlet, Note, How to turn the power on – Panasonic TC-W21 User Manual
Page 7: First switch on from new
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the Plug to the wall outlet
For Power Source details, refer to page 78.
Note;
Mains plug types vary between countries.
The mains plug shown at left may therefore
not be the type fitted to your Unit.
How to turn the Power On
Power Indicator
Push the Power switch on the Television to
turn the set on.
The Power Indicator will light.
Stand-by------------- Red
Power On------------Green
Note:
When in the Stand-by condition, it is possible
to turn the TV set on by pushing
* the “Power (Stand-by)“ button
* any of the "Direct Programme Number
Selection” buttons (0-9)
* the Programme Number Up and Down
buttons.
First Switch on from NEW
After you first switch on your Unit from NEW, and then push the ‘VCR" button (refer to pages 15 and 64), the
TV/VCR will automatically turn on to “VCR CLOCK SET” Mode.
Refer to page 48 on how to Set the Clock.
If the “VCR” button is not pushed, the TVAfCR Unit will operate normally.
However the Clock will not be set, and this will inhibit such functions as Timer Recording.