Panasonic TC-W21 - Manual (Page 59)

Recording of index Signals
Index signals will be recorded automatically in the following cases;
• At the tape position at which the Record Button is pushed to start recording.
• At the tape position at which a Timer Recording is started.
In the following cases, the Intro Search function may not work correctly:
• When using a tape recorded in the LP mode. (It is recommended that you use tapes recorded in the SP mode.)
• When some loud sounds are recorded between programmes or Karaoke tracks or at the beginning of
programmes.
• When the search for a Programme or Karaoke track is started from close to the beginning of the tape or close to
an interval between programmes.
• When a Programme or Karaoke track is very short (less than 40 seconds).
• When using tapes with poor quality, for example tapes that have been dubbed repeatedly.
• When there are passages with very weak sound or passages without any sound in a Programme or Karaoke
track.
• When the intervals between Programmes or Karaoke tracks are shorter than 6 seconds.
• When using tapes recorded with the Fade-in or Fade-out recording function.
• When some narration has been recorded at the beginning of the Programmes or Karaoke tracks.
• When using a tape recorded in the NTSC system.
59