Using the tape position counter – Panasonic TC-W21 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Tape Position Counter.
1
CALL
RESET
MEMORY
4
Displaying the Tape Counter.
Make sure that a tape is inserted.
The playback time after insertion
of the tape is shown after pushing
the CALL button. Push the button
once again to cancel.
■STOP
0
:
10.00
Resetting the Tape Counter.
Push the RESET button; the
counter resets to "0:00.00”.
■STOP
0
:00.00
Making the VCR memorise this
position.
Push the Memory button to
memorise the RESET position.
“M” appears on the screen to
indicate such memory to you.
■STOP
M 0:00.00
When either the FAST FORWARD
or REWIND button is pushed, the
tape automatically stops at
“0:00.00”, after such position has
been memorised.3