Basic transmission settings, Resolution, Transmission – Panasonic UF-250 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TRANSMISSION
BASIC TRANSMISSION SETTINGS
You can temporarily change six basic settings (Resolution, Contrast, Halftone,
Verification Stamp, Total Pages, and Individual Transmission Journal) before
any ordinary transmission. These settings can be altered before or after you
place documents on the ADF. After you finish transmission, your machine will
automatically return to the preset settings (except for Individual Transmission
Journal, which will remain as you set it). You can also change these settings
during transmission, but the change will not become effective until the next
page is transmitted.
Resolution
Your machine is preset to Standard resolution, which is suitable for ordinary
documents. Use FINE or Super-FINE for very detailed documents.
If satisfied, go to Step 4.
01 - J A N - 1 9 8 8 1 5 : 0 0
R E S O L U T l O N = S T D
(STD = Standard)
0 1 - J A N - 1 9 8 8 1 5 : 0 0
R E S O L U T I O N = F I N E
0 1 - J A N - 1 9 8 8 1 5 : 0 0
R E S O L U T I O N = S F I N E
(S FINE = Super-FINE)
To return to Standard, press RESOLUTION again.
You can now dial by pressing TEL/DIALI and a full number,
a One-Touch key, I
a
BBR
I
and two digits, or
I
REDIAL
NOTC
After changing the Resolution setting, you can
1. return to standby with STOP , or.
2. make a copy of the document to test the new Resolution setting by pressing
, or,
COPY
3. start a different series of settings by pressing IHALF TONE
STAMP I. MODE rn nn. or rFDN5fiON
ORIGINAL
4. To change the preset Resolution position, see page 26.
29