Panasonic UF-250 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
(b) To replace the stamp,
remove the Verification Stamp Unit, and replace the stamp with a new
one.
3.
After the stamp unit has been refilled or replaced, close the Bottom Board
Unit and replace the screws. Turn the power ON (I).
NOTE--------------------------------------------------------------------------------------------
When the stamp unit is set as above, the stamp will appear on the front
side of each page.
If you want the stamp to appear on the back side of each page, ask your
service personnel to change the stamp unit.
71
Advertising