Cpc mode, The cpc (calling party control) mode selection, Note – Panasonic KX-F220 User Manual
Page 118: System programming functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM PROGRAMMING FUNCTIONS
CPC MODE
The CPC (Calling Party Control) mode selection;
A: Usual selection (Default)
B: Select “B” in case of the followings.
When you use the call waiting service.
When some of incoming messages on the answering machine are interrupted.
NOTE:
When you use the call waiting service and the CPC mode is set to “A”, the call waiting service does not function.
■ Changing parameter
MENU
Press
MENU
4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4.REPORT]
Press then press “12”.
12.CPC MODE=A
[ l . A 2 . B ]
Example:
Changing to "B”.
CZD
SET
Press
“2”,
then press
SET.
12.CPC MODE=B
[l.A 2.B]
PROGRAM [l.DATA 2.TEL
3.SYSTEM 4.REPORT]
MENU
Press
MENU
to end the operation.
THU JUN29 3:00PM 00
4-9