Stamp default, The stamp default setting, Changing parameter – Panasonic KX-F220 User Manual
Page 124: System programming functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM PROGRAMMING FUNCTIONS
(CONT.)
STAMP DEFAULT
The STAMP DEFAULT setting;
You can print the STAMP (0) on your originals when transmitting a document successfully.
ON:
The STAMP indicator is lit. Press the STAMP button if you do not want to print the 0 mark. After the
transmission, it will be ON automatically.
OFF: The STAMP indicator go out. Press the STAMP button if you want to print the 0 mark. After the
transmission, it will be OFF automatically.
■ Changing parameter
MENU
Press
MENU
4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4.REPORT]
Press “#”,then press “19”.
19.STAMP DEFAULT=OFF
[l.OFF 2.ON]
Example:
Changing to "ON”.
Press
“2”,
then press
SET.
19.STAMP DEFAULT=ON
[l.OFF 2.ON]
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4,REPORT]
SET
MENU
Press
MENU
to end the operation.
THU JUN29 3:00PM 00
4-15