Aux. leads, The aux. leads setting, Note – Panasonic KX-F220 User Manual
Page 119: Changing parameter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AUX. LEADS
The AUX. LEADS setting;
OUT: Usual selection (Default)
IN: Some KSUs (Key Service Unit) may require you to set the AUX. LEADS to "IN". Follow the instruction
manual of your host PBX. You can use as many function of your host PBX as you like.
NOTE:
If you do not need to use AUX. LEADS, set to “OUT" always.
■ Changing parameter
MENU
Press
MENU
4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM[l.DATA 2.TEL
3.SYSTEM 4.REPORT]
Press then press “13”.
13.AUX,LEADS=OUT
[l.OUT 2.IN]
Example:
Changing to “IN”.
(ZZ)
SET
Press
“2”,
then press
SET.
13.AUX.LEADS=IN
[l.OUT 2.IN]
PROGRAM[1.DATA 2,TEL
3.SYSTEM 4.REPORT]
MENU
Press
MENU
to end the operation.
THU JUN29 3:00PM 00
4-10