Panasonic TX-86W100A - Manual (Page 10)

Remote Control Teievision Operation
BUTTON WHAT !T DOES
Piciure Sn Picture lUSod©
Allows two pictures to be viewed at the same
time. Pressing the Red button will change the
position of the small picture. The Yellow button
swaps be’ween the wo pictures. The Blue button
removes the option bar.
This mode is not available in 4:3 mode.
LI
jlOCATg CHANGE EXIT
Piotyre Out Of Picture RIode (4:3 Rifode only)
Allows two pictures to be viewed at the same
time. The pictures will be shown side by side.
The Yellow button swaps between the two
pictures. The Blue button removes the option bar.
I
^
If LOCATE
I
I CHANi
Picture And Picture Mode
Allows two pictures to be viewed at the same
time. The pictures will be shown side by side.
Both pictures will be the same size.
The Yellow button swaps between the two
pictures. The Blue button removes the option bar.
RECALL
Pressing this button will display all current active functions. The functions that can
be displayed include AV Number, Programme Number, Sound Option, Picture
Option, Stereo or Mono and Off-Timer setting. Pressing the button again cancels the
recall function and removes the text being displayed on the screen,
If the button is not pressed within about 2 seconds it automatically switches to
display the Programme Number or the AV Number and the Off-Timsr setting.
Pressing the button again cancels the recall function and removes the text being
displayed on the screen.
i^ORMALiSATlOM
The Normalisation Button is used to reset the teievision to factory set levels. Colour.
Sharpness, Contrast Brightness, Treble, Bass and Balance will be reset. The button
will only operate if the menu is displayed on the screen.
STR
STR
The STR (Store) button is used with a number of features to store settings after
adjustments have been made or options have been set. It is also used in TELETEXT
and tuning functions.
HELP
HELP
Pressing this button displays on screen instructions on how to adjust various
settings and how to connect external equipment. Press the HELP button and select
one of the options. Please refer to page 13.
Please refer to drawing on Page 7 for location of Remote Control Buttons.
10