Panasonic TX-86W100A - Manual (Page 38)

Connectinq Equipment to the TV
Rear Panel Connections
When using a VCR with the teievision always connect the Aerial to the VCR and connect an RF Cabh
(not supplied) between the VCR RF-Out and the television RF-in.
You can watch videos by either tuning the television to the
VCR (see page 29} or by connecting the VCR to the rear
AV terminais. 0 №: « ©ir
RF Cable
Note; When connecting a mono VCR through the RF-!n, please switch the TV to mono.
i he Monitor Out terminals reproduce the signals currently on the television screen. The on-screen signals
could be a television programme or signals connected to one of the AV inputs.
The Monitor Out facility can be used to allow one video source (videotape, video disc etc.) to be
connected to more than one television. Connect the Monitor out from this television to the AV input of the
second television.
If a video recorder is connected to the Monitor Out and video sources (VCR, video disc, camera etc.) are
connected to one or more of the AV inputs, the television becomes a visua! display for tape editing or
copying. *
The Monitor Out Audio can also be connected to a stereo amplifier or other hi-i1 equipment.
VCR
AVIN
(( o s cidTin^
AUDIO AMPLIFIER
(No Video Connection)
^tONITOR
OUT
VIDEO 0
L ('0j
I
AUOtO
R C O )
NOTE:
Never connect the same video recorder or other device to both
the VIDEO IN and MONITOR OUT terminals of this television
* WARNING
Unauthorised recording of material from Television Broadcasts or from other video
and/or audio sources may contravene copyright laws.
39