Signal names for d-sub 15p connector, Connecting, Connecting to the rgb input terminafs – Panasonic TX-86W100A User Manual
Page 36: Equipment to the tv front panel connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting
Equipment to the TV
Front Panel Connections
Connecting to the RGB Input Terminafs
Behind the front panel door is the headphone socket, the AV3 input and the RGB input.
Personal computers (PC) with 640 x 480 (31.5kHz / 60Hz) or 640 x 400 (31,5kHz / 70Hz)
resolution can be connected to this television.
Mole: the display will prompt you to set the resolution to 640 x 480.
The computer must be set to High Colour (16 bit).
In some cases other PCs may not work with this TV set.
There is no audio signal in RGB mode.
Connect the sound cables to the AV3 Audio input terminals.
Some computers such as PC-98 and Macintosh require a commercially sold adapter betvreen the
RGB cable (D-Sub 15P) and the computer.
There is no need for an adapter when using computers with a DOS/V compatible D-Sub 15P
terminal.
With some computers it may be necessary to press Function F4 twice to give a display on the
television.
There are no computer connection cables included with this television.
Signal names for D-Sub 15P Connector
@©@©©1
Pin layout for RGB
Terminal
Pin
Signal
Pin
Signal
Pin
Signal
No.
Name
No.
Name
No.
Name
1
R
6
GND
11
GND
2
G
7
GND
12
NC
3
В
8
GND
13
HD/SYNC
4
GND
9
NC
14
VD
5
GND
10
GND
15
NC
GND is Ground
NC is Not connected
36