To assemble cleaner, Mtaching handle to vacuum clianer, Using the cord hook – Panasonic QUICKDRAW MC-V5117 User Manual

Page 6: Attaching handle to vacuum cleaner, Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TO ASSEMBLE CLEANER

A

WARNING

Electrical Shock Hazard.

Do not plug into electrical supply until assembly is complete. To do so could result
in electrical shock or injury.

MTACHING HANDLE TO VACUUM CLiANER

The vacuum cleaner main body and handle are packed separately.

1. The handle screw has

been installed for

shipping purposes.

Please remove the

screw before inserting
the handle. Insert the

handle as shown in the

illustration. Ensure that the
cord hooks are on the
back side of the handle
before inserting.

2.

Line up the small hole in

the handle with the small

hole In the vacuum cleaner

and insert the screw that
you have removed. Use a

screwdriver to assure the
screw is tightened
securely.

3. There is a recessed area between

the upper cord hook base and the

handle that is designed to secure

the cord during vacuuming.

Always push the power cord ^
down in this recessed area to help
keep the cord from hanging near

the nozzle and being damaged.

4. Loosely wrap the cord around both

cord hooks. Secure the plug head to

the cord by pushing the cord into the

retainers on the plug head.

USING THE CORD HOOK

1. The upper cord hook has a

quick-release action. To

release the cord, rotate the

hook downward and the
complete power cord will
drop off the hook for
immediate use.

Do not unplug the power cord by
pulling on the cord. Grasp the
plug head and pull to unplug

the vacuum cleaner.

Return the hook to the upright

position before attempting to
rewind the cord.

-6-

Advertising