To operate cleaner, Power cord, On/off switch – Panasonic QUICKDRAW MC-V5117 User Manual

Page 9: Handle adjustments, Caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TO OPERATE CLEANER

A

CAUTION

Do not use outlets above counters Damage to items m the surrounding areas

could occur Be sure the switch is in the off position while plugging the cord in.

POWER CORD

NOTE To reduce the nsk of electrical shock, this vacuum has a polanzed plug, (one blade is wider

than the other) This plug will fit in a polanzed outlet only one way If the plug does not fit fully in tfie
outlet, reverse the plug If it still does not fit, contact a qualified electncian to install №e proper outiet

DO NOT CHANGE THE PLUG IN ANY WAY

ON/OFF SWITCH

1 Plug the power cord into a 120V outlet

To stop the vacuum cleaner, push the

switch on the top of the dust compartment

to the OFF position

2 To start the vacuum cleaner, push the v

OFF ON

switch on the top of the dust compartment

\

/---------------

to the ON position \

IXLJ

HANDLE ADJUSTMENTS

The handle may be lowered
to any position required Just

step on the area as indicated
by the Illustration and
tower the handle as

desired

1 Upright position

The handle locks in this
position for storage
The handle should
always be in an

upnght positon when
the cleaning tools
are used

2 Middle position

This position is for

normal cleaning

3 Low position

This position

IS used for

cleaning

under

furniture

- 9 -

Advertising