Continued), 0 timer set button (timer set), 2) timer select buttons (t select a) – Panasonic SC-CH7 User Manual
Page 14: 0 remote signal sensor (sensor), 0 band select button (band), 0 preset-tuning'buttons (v preset a), 0 timer cancel button (cancel), 0 timer setting confirmation button (recall), 0 clock set button (clock set), 0 memory button (memory)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Front Panel Controls and Functions
(continued)
0
Timer set button (TIMER SET)
This button is used when making the timer setting.
(2) Timer select buttons (T SELECT A)
These buttons are used when setting the time. And when
making the timer setting, to select the type of timer operation,
the day, the time, etc.
0
Remote signal sensor (SENSOR)
0
Band select button (BAND)
This button is used to select either the MW, LW or FM band.
0
Preset-tuning'buttons (V PRESET A)
These buttons are used to select channel numbers for a
broadcasting station which has been stored in the tuner’s
memory.
0
Timer cancel button (CANCEL)
This button is used to cancel the timer setting.
© Power “STANDBY (!)/ON” switch
(POWER STANDBY (!)/ON)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the “standby” condition when this switch is
set to the STANDBY position. Regardless of the switch
setting, the primary circuit is always “live" as long as the
power cord is connected to an electrical outlet.
0
Timer setting confirmation button (RECALL)
This button is used to confirm the timer setting.
0
Clock set button (CLOCK SET)
This button is used to set the present time.
0
Memory button (MEMORY)
TTiis button is used when presetting broadcast station
frequencies into memory.
®
Tuning buttons (▼ TUNING A)
These buttons are used for tuning the desired broadcast
station.
-14-