1 press the band select button to select the, Desired band *‘mw” or “lw’’), 3 press the memory button momentarily – Panasonic SC-CH7 User Manual

Page 32: Select the desired “channel, 5 press the memory button momentarily, Fm mode (fm auto, mono) memory

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Memory Presettings

(continued)

3 * 5 4

1

Stations can be freely preset to any desired channel.

A maximum of 28 broadcast stations can be memorized.

Carry out the steps 1 and 2 of "Standard Operations” on page
20

.

1 Press the band select button to select the

desired band

*‘MW” or “LW’’).

2 Press the appropriate tuning button to tune to

the desired broadcast.

(Refer to "Frequency tuning" on page 31.)

3 Press the memory button momentarily.

(The memory indicator will illuminate.)

/

auto

CH.

Note:
If the memory button is pressed continuously, the automatic
memory presetting is activated. To stop the automatic
memory presetting, press the tuning button.

Then t^in again from step 2.

Select the desired “channel”

(Refer to "To confirm the stations which are preset to each

channel" on page 31.)

5 Press the memory button momentarily.

(The memory indicator will go out.)

6 Repeat the above procedures to make mem­

ory presettings.

■ FM mode (FM AUTO, MONO) memory

With this unit, it is possible to enter into the memory FM broadcast

stations in the nfronaural mode. This is convenient when entering
into the memory an FM broadcast station that Is broadcasting FM
stereo signals in whi^ there is much noise.
(T) Follow above steps 1 through 2.

(g) Press the FM mode button to select “MONO". (The “MONO"

FM mode indicator will illuminate.)

@ Follow steps 3 through 5 above.

ooooo

òóóòt^

tìàùss

P_OQ--

sSt5

V.»

-32-

Advertising