STIEBEL ELTRON SHC 4 - Manual (Page 5)

EN
GL
IS
H
www.stiebel-eltron-usa.com SHC 2.5 / SHC 4 | 5
INSTALLATION
Technical Data
6. Technical Data
SHC 2.5 SHC 4
Item No. 233219 234046
Voltage 110–120 V 110-120 V
Wattage 1300 W 1300 W
Amperage 11.3 A 11.3 A
Phase Single, 1/N/PE Single, 1/N/PE
Frequency 50/60 Hz 50/60 Hz
Type of installation Under sink Under sink
Internal tank material Steel Steel
Enclosure material Plastic Plastic
Thermal insulation material Polystyrene Polystyrene
Color white white
Nominal water volume 2.65 gal 10 l 4 gal 15 l
Standby energy loss 1 0.37 kWh/day 0.39 kWh/day
Recovery time 18 minutes 27 minutes
Temperature setting range 86–140 °F 30–60 °C 86–140 °F 30–60 °C
Maximum operating pressure 150 psi 1.0 MPa 150 psi 1.0 MPa
Weight empty 15.9 lbs 7.2 kg 19.8 lbs 9.0 kg
Weight full 38.6 lbs 17.5 kg 52.9 lbs 24.0 kg
Water connections 1/2˝ NPT 1/2˝ NPT
1 Measured at 131°F / 55°C set point temperature in 68°F / 20°C ambient air temperature.
6.1 Dimensions, SHC 2.5
18 1
1/16
″ (475)
1 1/16
″ (26.5)
12 5/8
″ (320)
1 3/4" (45)
3 15/16" (100)
11″ (280)
3 1/8″ (80)
10 5/8″ (270)
5 1/2" (140)
6.2 Dimensions, SHC 4
19 3/4
″ (501)
15/16
″ (23)
13 7/16
″ (342)
1 15/16" (49)
3 15/16" (100)
12 5/8″ (320)
3 1/8″ (80)
12 1/2″ (318)
7 7/8" (200)
in. (mm)
Hot Water
Outlet
1/2″ NPT
male thread
Cold Water
Inlet
1/2″ NPT
male thread
in. (mm)
Hot Water
Outlet
1/2″ NPT
male thread
Cold Water
Inlet
1/2″ NPT
male thread