360 Systems DigiCart/E - Manual (Page 27)

Administration
• 25
3. Click on Server for NFS. Click on Client Groups in the window that is displayed.
4. Type in a group name, and click New. You can create as many groups as you require.
5. Click on Advanced. Select a group if there is more than one. Type the IP address of a DigiCart into
the box at the bottom and click Add Clients. (You can add the same DigiCart to more than one group
if desired. Highlight the entire IP address and type Ctrl-C, then click Add Clients. Select a different
Group, then click inside the Client Name field, and type Ctrl-V to insert the IP Address.) Repeat for
all DigiCarts that will have membership in a group.Units that do not belong to any group will only
have access to net drives that have their permission set to Read-Write.