360 Systems DigiCart/E - Manual (Page 37)

Operation
• 35
Making Recordings to the Network
If a DigiCart/E recorder is connected to the network, and the “Morning_Show” directory is mounted as a
DigiCart drive, directories 0-9 and S will appear on the DigiCart in the same way as if a local drive was
selected.
In this example, if directory 0 is made current, and a new recording is made, a new file will appear on the
server when the recording is complete.
These files can be renamed by DigiCart, and might then appear as follows.
The file names that appear on the server are longer than the file names shown on the DigiCart. DigiCart adds
important information about the file to the file name. The following description of the file name format
should clarify the entire naming string. Use caution when renaming files on the server. If certain parameters
in the file name are changed, the file may not be displayed on the DigiCart, and therefore will be unplayable.
See Rename Files on page 37.