360 Systems Short/Cut Editor - Manual (Page 6)

Page iv
360 Systems
Digital Audio Inputs 15
Digital Audio Outputs 16
D-NET File Transfer Ports 16
Power Supply 16
Power Switch 16
Headphone Jack 16
Display Viewing Angle (Contrast Control) 16
GPI and Tally Outputs 16
G.P.I. Connector Pin-Outs 17
Setting LED Current 17
GPI Input Assignment Options 17
Connecting to Telephone Control Systems 19
Using External Sample Rate Synchronization 19
CHAPTER III _____________________________________ 23
RECORDING
Sample Rate 23
Record Mode (Basic) 24
Setting The Recording Threshold 24
Record Pause 24
Recording Multiple Takes 25
Insert Recording 25
Basic Insert Recording 25
Replacement Insert Recording 26
CHAPTER IV _____________________________________ 27
EDITING
EDIT OPERATIONS..........................................................................................................27
Waveform Display, with Callouts, illustration 27
Location Marks 28
Waveform Display, Showing Marks, illustration 28
The Zero Mark 28
Placing Location Marks During Recording 29
Edit Marks 29
Edit In Mark at Cursor,illustration 30
Edit In/Out Marks set,illustration 30
Play a Selected Segment 30
Cut a Selected Segment 31
Cut to Hot Key 31
The Copy Command 31
Copy a Selected Segment of Audio 31
Copy a Selected Portion of a File to a Hot Key 31
Copy an Entire File From Disk to a Hot Key (Assign a Hot-Key) 31
Insert a Cut Or Copy Segment 32
Insert at a Single Point 32
Insert Replace 32
Crossfade Edits 32
Cut with Crossfade 33
Performing a Crossfade Only Cut 35
Insert with Crossfade 36
Gain Editing 37
Gain Edit Menu - illustration 37
Adjust Level 38
Set Gain Value 39
Fade In and Fade Out 41
Relative Fade 41
Erase 43
Erasing a Highlighted Segment Within a File While Editing 43
Erasing a Hot Key Assignment in the Files Display 43