Brookfield DV-III Ultra Rheometer - Manual (Page 44)

Brookfield Engineering Laboratories, Inc. Page 44 Manual No. M/98-211-B0104
Brookfield Engineering Laboratories, Inc. Page 44 Manual No. M98-211-E0912
The RheoLoader software is a Windows 95 (or above) based
program used to create, save, print and download B.E.V.I.S.
programs to the DV-III Ultra Rheometer. Start the software by
clicking on its associated icon or by clicking the Start button;
select Run; enter the name of the program to execute
{Rheoad.exe}; then click OK.
This is the grid where the operator programs are created. It
is used to view and edit the B.E.V.I.S. programs. When the
software starts, an empty grid appears on the left of the screen.
Highlight a command in the list box to the right of this grid,
then click on the Insert button to insert the command into the
highlighted line of the grid. This same insertion task can also be
accomplished by double-clicking on the appropriate command
in the list box to the right.
Before being permitted to insert another command, the parameter
for the previous command in the grid must be entered if one
is required. This parameter is entered into the last column of
the grid.
Select the COM (RS-232) port the Programmable DV-III Ultra Rheometer is connected
to from the COM Port drop down list. Low number generally represent RS-232 Ports.
High number generally represent USB Ports.
The refresh button is used if all ports are not visible.
Click the Open File button to load existing B.E.V.I.S. programs.
Click the Save File button to save the B.E.V.I.S. program displayed in the grid.
Click the Print button to print the B.E.V.I.S. program displayed in the grid.
Click the Insert button to insert the B.E.V.I.S. command selected in the Commands
box into the selected row in the program grid.