Checkline YSL-2000HD - Manual (Page 4)

4
3 .0 CON T EN T S OF COM PLET E OU T FI T
The YSL-2000HD is supplied with the following accessories in a foam-fitted,
carrying case:
1. Slide-on Measuring Head for Yarn/Wire Speed & Length
2. Slide-On Measuring Head for Contact Tachometer Operation
3. Surface Speed Wheel
4. Cone Tip Measuring Adapter
5. Shaft Extension
6. Reflective Tape
7. Two (2) AA Batteries
1
2
6
3
4
5
13
1 0 .0 M EM ORY SY ST EM
The YSL-2000HD is supplied with
a built-in memory system which
stores the last measurement, maximum
measurement, minimum measurement,
and the average measurement which
occurred during a measuring period.
A measuring period is the interval of time while the Measure key is
depressed. The stored values are retained in memory even when the power
turns off (auto power off). To recall the stored values after auto power off:
1. Press the Measure key to turn the power on
2. Press the MEM key to recall the desired value
The Memory key accesses the YSL-2000HD’s built-in
memory. Each time the MEM key is pressed the values
stored in memory will be recalled to the display in the sequence listed
below. The appropriate memory indicator will be shown together with
the recalled value on the display.
Note: When the batteries are removed, the values stored in memory
will be lost.
M EM
MEM
MAX
MIN
AV
rpm
8.8.8.8.8
MEM
MAX
MIN
AV
rpm
8.8.8.8.8
MEM
MAX
MIN
AV
rpm
8.8.8.8.8
MEM
MAX
MIN
AV
rpm
8.8.8.8.8
Last
Maximum
Minimum
Average