Canon FS 2710 - Manual (Page 25)

25
25
To Set the Magnification Factor
Set the desired magnification factor on the control panel.
Hint
The Relationship Between Data Volume and Scanning Resolution
The higher the magnification and scanning resolution settings, the greater the
file size of scanned images. There are certain inconveniences associated with
overly large data volume, such as the inability to fit a file on a single floppy disk
and the risk of causing a temporary computer slowdown by
overwhelming its processing capabilities. A typical 35 mm
picture scanned with the 24bit Color mode may produce files in the
following sizes, which correspond to the scanning
resolutions shown.
Slider
Drag the slider bar in
either direction or use
the arrow keys to
change the resolution.
Click here to return the magnifi-
cation factor to 100%.
Click inside these boxes to enter values
directly.
35 mm Film
* These numbers are approximate estimates and may differ from actual scan results.
S T E P 2
170 dpi 340 dpi 680 dpi 1360 dpi 2720 dpi
116 KB
463 KB
1.8 MB
7.3 MB
29.5 MB