Canon FS 2710 - Manual (Page 42)

42
42
Rotating or Reversing Images Before Scanning
An image may be rotated or reversed before scanning. As with a
normal scan, Plug-in module FS automatically closes and returns to
Photoshop once the scan is complete.
To Change the Orientation of an Image
Specify the Scan Area
See Aspect Ratio (p. 28) .
Click on any one of the [180˚ Clockwise Rotation], [90˚ Clockwise
Rotation], [90˚ Counterclockwise Rotation], or [Flip] buttons.
The image will be rotated or flipped in the Preview window.
Click on the [Scan] button.
• The scan will initiate.
• The Plug-in module FS control panel will close and the Photoshop window will
open and display the acquired image.
Hint
• If the selected Scan Area is too small (less than 64 x 64 pixels), the Scan button
will not respond to a mouse click.
• Even after scanning is completed, there may be occasions when the Plug-in
module FS control panel does not close. You can correct this with the [Pre-
view Window] command on the [Preferences] menu.
(p. 31)
➟
S T E P 3