Canon FS 2710 - Manual (Page 62)

62
62
Film is scanned by collecting the light that is passed through it. This makes it possible to
adjust the brightness of the image by changing the amount of light (exposure) used to
scan it. This is adjusted by changing the scan speed. With the Auto setting in Plug-in
module FS, exposure adjustment is automatic. This setting should be used for most
scanning jobs. If, however, you cannot achieve the effect you want with the Auto
setting, you can manually overexpose or underexpose the image to create a special
effect. Overexposing the image produces a lighter image. The scanning speed will be
accelerated for negative film and slowed down for positive film. Underexposing the film
produces a darker image. The scanning speed will be slowed for negative and film and
accelerated for positive film.
Hint
• If you are using the FS2710, positive film can be adjusted by three exposure
stops and negative film by five stops.
• If you are using the 2700F, negative film can be adjusted by five stops. The
exposure of positive films cannot be adjusted.
Film Correction — Exposure Adjustment
Medium exposure
Underexposure
Overexposure