Canon FS 2710 - Manual (Page 6)

6
6
Scanning Procedures
Follow these procedures to use Plug-in module FS.
S T E P 3
S T E P 2
S T E P 1
Has the scanner been attached?
Prepare for Scanning ➜ p. 15
• Select a Film Type
• Preview
• Set the Scan Mode
• Select the Output Device
• Set the Magnification
• Set Preferences
• Set the Auto Eject Function
p. 18
p. 19
p. 20
p. 23
p. 24
p. 26
p. 34
• Scan Area Settings
• Zooming
• Scanning
• Rotate or Revers the Image
Before Scanning
• Save the Scanned Image
If the current brightness
and color pose no problem,
there is no need to adjust
these settings.
Scan ➜ p. 37
Adjust and Edit Scanned Images
➜ p. 44
Verify the Image Before Scanning
(Browser Window) ➜ p. 35
Are the Brightness and Color Satisfactory?
Refer to the Getting Started
Guide that accompanied
your scanner for attachment
instructions.
p. 38
p. 39
p. 41
p. 42
p. 43
• Histogram
• Brightness and Contrast
• Color Balance
• Tone Curve
• Gamma Value
• Threshold
• Focus Correction
• Exposure Adjustment
• Auto Tone Correction
p. 48
p. 50
p. 52
p. 54
p. 56
p. 58
p. 60
p. 62
p. 64
Install the Plug-in module FS Software ➜ p. 11
S T E P 4