Cisco SERIES 7970 - Manual (Page 13)

4-13
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
SW Port
Configuration Speed and duplex of the network
port (labeled 10/100 SW on the
Cisco Unified IP Phone 7970, and
10/100/1000 SW on the Cisco
Unified IP Phone 7971G-GE).
Valid values:
• Auto Negotiate
• 10 Half—10-BaseT/half
duplex
• 10 Full—10-BaseT/full duplex
• 100 Half—100-BaseT/half
duplex
• 100 Full—100-BaseT/full
duplex
• 1000 Full—1000-BaseT/full
duplex
If the phone is connected to a
switch, configure the port on the
switch to the same speed/duplex as
the phone, or configure both to
auto-negotiate.
If you change the setting of this
option, you must change the PC
Port Configuration option to the
same setting.
1. Unlock network configuration options.
2. Scroll to the SW Port Configuration
option and then press the Edit softkey.
3. Scroll to the setting that you want and
then press the Select softkey.
4. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change