Editing values – Cisco SERIES 7970 User Manual

Page 4

background image

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Configuration Menus on the Cisco Unified IP Phone 7970 Series


Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones


Make sure to lock options after you have made your changes.


Do not press **# to unlock options and then immediately press **# again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press **# again.

Related Topics

Displaying a Configuration Menu, page 4-2

Editing Values, page 4-4

Overview of Options Configurable from a Phone, page 4-5

Network Configuration Menu, page 4-7

Device Configuration Menu, page 4-15

Editing Values

When you edit the value of an option setting, follow these guidelines:

Use the keys on the keypad to enter numbers and letters.

To enter letters using the keypad, use a corresponding number key. Press the
key one or more times to display a particular letter. For example, press the 2
key once for “a,” twice quickly for “b,” and three times quickly for “c.” After
you pause, the cursor automatically advances to allow you to enter the next

To enter a period (for example, in an IP address), press the . (period) softkey
or press * on the keypad.

Press the << softkey if you make a mistake. This softkey deletes the character
to the left of the cursor.

Press the Cancel softkey before pressing the Save softkey to discard any
changes that you have made.