6 electrical connection, 1 rotation direction of the drive motor, 7 initial start-up / function test – FRITSCH PULVERISETTE 1, Model I premium line User Manual
Page 22: Installation
4.
Insert the funnel (1) in the corresponding funnel opening on the
top of the Jaw Crusher.
NOTICE!
Pay attention to the funnel's installation direction.
The funnel opening must face the front.
5.
Attach the funnel (1) to the housing using the previously removed
4 countersunk head screws (D).
The countersunk head screws (D) must be tightened firmly in
order that the rubber seal is compressed and tight.
4.6 Electrical connection
Before establishing the connection, compare the voltage and current
values given on the type plate with the values of the available electrical
system.
The electrical system should meet the following requirements:
n
3~ / 1~ connection
n
Fuse protection of at least 16A for the socket connection
n
or automatic circuit-breaker with 16A and "C" characteristic
n
Functioning protective earth.
4.6.1 Rotation direction of the drive motor
The Jaw Crusher is equipped with an automatic rotation direction detec-
tion unit.
4.7 Initial start-up / function test
DANGER!
Crushing hazard!
Only put the jaw crusher into operation with the funnel (1)
mounted!
Installation
- 22 -