FRITSCH PULVERISETTE 1, Model I premium line - Manual (Page 46)

8.2.1 Replacing the V-belt
m Open-ended wrench - size 17
n Cross-head screwdriver
o Hex wrench - size 10
1. Remove the 6 fastening screws from the belt guard (6) using the
screwdriver (n), lift it off and place it to the side.
2. Undo the screw for the motor cover (23) using the screwdriver (n)
and open it.
3. Use the hex wrench to undo the 4 cylinder-head screws (H) on the
motor's adapter plate (24).
Tools
Maintenance
- 46 -