FRITSCH PULVERISETTE 9 - Manual (Page 17)

Seite 16
TABLET PRESS
4.3 Pressing procedure
1. Turn the stop valve lever (8) in a clockwise direction to "close".
2. Rotate the spindle (4) upwards using the hand wheel (3).
3. Open the door (5) to the workspace.
4. Place the ready-filled pressing tool together with the bottom tool (12) in
the centre of the press on the pressure cylinder piston (6) pressure plate
(6a).
CAUTION Injury hazard!! Danger of crushing!!
When raising the 3-part pressing tool, ensure that the parts
are not displaced or even fall apart.
open
close