8 warranty, 8warranty – FRITSCH PULVERISETTE 9 User Manual
Page 23
Seite 22
TABLET PRESS
4.
Insert the oil dipstick supplied (13) into the opening and press it into the
drillhole with a little pressure. It must be positioned correctly.
5.
Pull the oil dipstick (13) out. Now check the oil level against the marking
located on the middle of the dipstick.
6.
If the oil level does not come up to the top of the area marked on the
dipstick, standard hydraulic oil (for example Hipol 15 to PN Standard or
Shell Tellus 37) must be refilled.
7.
After this, screw the locking screw (9) back in using the socket spanner
(16), open the vent head and replace the plastic ring and pressure plate.
8
Warranty
The warranty card enclosed with the machine upon delivery must be completely
filled out and returned to the delivering factory so that the warranty can enter
into effect.
Online registration is also possible. More information can be found on your
warranty card or on our website
The company Fritsch GmbH in Idar-Oberstein and your "Technical Application
Laboratory" or the corresponding national representatives would be happy to
provide you with advice and assistance.
Please include the serial number given on the type plate along with any
questions.
NOTE
Please note that the original Fritsch packaging must be used
in the event that the machine is returned. Fritsch GmbH is
not responsible for damages resulting from improper
packaging (non-Fritsch packaging).