FRITSCH PULVERISETTE 9 - Manual (Page 21)

Seite 20
TABLET PRESS
5 Accessories
Pressing tool for pellets of 32 mm diameter.
6 Cleaning
Use a moist cloth to rub the device clean. If necessary, the pressing tool may
be placed under running water and brushed clean with standard detergents.
After this process it must be dried thoroughly so that the press material does
not adhere.
7 Maintenance
 The Pellet Press has been vented at the works. If additional venting of the
oil pressure circuit is necessary, please contact a Fritsch GmbH service
technician.
 If the spindle (4) stops running smoothly it can be lubricated using a
standard lubricant.
 Check the oil level in the hydraulic pump once a year. The oil tank locking
screw (9) is located to the left of the pressure plate (6a).
CAUTION Signalize maintenance work with a warning sign.