Hangar 9 Piper Pawnee 40 ARF - Manual (Page 24)

24
o Step 11
Attach the struts to the fuselage strut brackets using two
strut attachment pins and two retainer pin clips.
o Step 12
Once the length of the struts has been set, make sure to
use threadlock on the nuts and strut ends to prevent them
from vibrating loose. Also tighten the 3mm nut against the
strut end to lock everything into position.
 Step 13
Repeat Steps 6 through 10 to install the remaining wing
panel by sliding it onto the wing tubes and securing it to
the fuselage.
Section 3: Wing Attachment