Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 26)

HI 2151/30WC MANUAL
2-6
• Response Time
1 millisecond after update
• Isolation from Main Board
300 VAC or 450 VDC
• Update
50 milliseconds (20 times/sec.)
• Voltage Out
• Range
0 - 5 VDC, 0-10 VDC (or reverse of these)
• Max Current
5 ma (2 K ohm load @ 10 V)
• Temp. Stability
10 ppm/C or 4 mV total from 30 to 120 degrees F
• Current Out
• Range
0 - 20 mA, 4-20 mA (or reverse of these)
• Max Voltage
12 V allowing 0 - 600 ohm load at 20 mA
• Mating Connector
6 pin Phoenix
Binary Coded Decimal
(BCD) (-B2) • Resolution
6 digits
• Data Drive
15 LSTTL loads (6 mA total)
• Print/Not Print Drive
10 LSTTL loads (4 mA)
• Transmit Distance
50 feet (15.24 meters)
• Cable
6" 40 pin right angle to 37 pin Dshell Connector. Use with -B6 and
-B7 Options