Hardy ANY-WEIGH Bench Scales - Manual (Page 24)

Any-Weigh™ Series Bench Scales
5-2
NOTE: By selecting OFF (0) or 1 the scale increases the
updates per second from 10 to 55.
• Parameter 3 = Calibration Type
0 = Hard Cal, 1 = C2 Cal, Other = Not Cal’d
(Read Only)
Length in Bytes = 1
• Parameter 4 = Span Weight in Lbs
1 to 2147483647 10000.000
Length in Bytes = 4
• Parameter 5 = Averages
0 to 255 10
Length in Bytes = 1
• Parameter 14 = Number of C2
®
Chips Found
0 to 8 (Read Only)
Length in Bytes = 1
• Parameter 15 = Net Weight in Lbs
Read Only
Length in Bytes = 4
• Parameter 16 = Gross Weight in Lbs
Read Only
Length in Bytes = 4
• Parameter 17 = Tare Weight in Lbs
-999999 - 999999 0.00
Length in Bytes = 4
• Parameter 18 = Tare Command
0 to 1 (Set to True to Complete Command)
Length in Bytes = 1
• Parameter 19 = Zero Command
0 to 1 (Set to True to Complete Command)
Length in Bytes = 1
• Parameter 20 = Calibrate Low Command
0 to 1 (Set to True to Complete Command)
Length in Bytes = 1