Hardy WS100 Configuration Software - Manual (Page 37)

HI WS100 CONFIGURATION SOFTWARE
5-10
FIG. 5-7 C2 SERIAL NUMBER SCREEN
Remote Screen Step 1. Click on the Remote Tab. The Remote
page appears. (See Fig. 5-8)
NOTE: The Remote Display will only appear if the HI 1746-
WS module is installed in a remote chassis, with the
jumper set to the remote mode of operation.
Step 2. The Remote screen is a quick way to mon-
itor gross weight of an HI 1746-WS mod-
ule, installed in a remote chassis and
operating in the remote mode. This screen
gives the user a faster Gross Weight read-
ing than the Live Weight display.
Step 3. The indicator lights for Motion, and A/D
Conversion and A/D Converter should all
be green in normal operation. A motion
red light means the scale exceeds the
Motion Tolerance setting. A/D Conversion
and A/D Converter red lights means a mal-
function.