Kofax Ascent Captur - Manual (Page 7)

Ascent Capture for IBM ImagePlus/400 WAF Release Notes
Kofax, Inc. 3
Administration and Release Workstations – Additional Requirements
The Ascent Capture Administration and Release workstations must have the following
components installed:
„
Ascent Capture 5.x, 6.0, 7.x, Kofax Capture 8, or Kofax Capture 9
„
Microsoft Internet Explorer 6.0 (or higher)
„
One of the following iSeries Client Access Family for Windows:
„
Client Access/400 for Windows NT V3R2M0 (SP SF62608)
„
Client Access Express for Windows V4R4M0 (SP SF63638)
„
Client Access Express for Windows V5R1M0 (SP SI08389)
„
Client iSeries Access for Windows V5R2 (SP SI16135)
„
Client iSeries Access for Windows V5R3 (SP SI10817)
Note The Release workstations must be configured so that the AS/400 drive letter is assigned to
the file system specified in the WAF system configuration. (This may be “QDLS,” “Root,” “IFS,”
or others depending on your system configuration.)
Source Code
The source code for the Ascent Capture for IBM release script is provided and it is located on the
Kofax Web site at www.kofax.com. The source code can be opened, edited, and compiled in
Visual Basic 6.0 with Service Pack 5. To use the modified release script, you must replace the
Ascent Capture for IBM release script WAFRel.dll with the modified version on the client
workstation.
Refer to the documentation that came with your IBM product and Visual Basic documentation for
assistance.