Kofax Capture Export Connector - Manual (Page 17)

Ascent® 7.5 Release Script for Documentum 6.0-6.5 Release Notes
Kofax, Inc. 13
prompted to replace the existing file, select “Yes.” You will need to repeat this procedure
on each Administration and Export workstation that will be using the Documentum
export connector.
Note In order to successfully modify and compile the export connector, development must occur
on a workstation with the appropriate versions of Kofax Capture, CAPTools, and the
Documentum DFC previously installed. To use the modified export connector, you must replace
the Documentum export connector DCMTRel6_v75.dll with the modified version on the client
workstation. If you receive an access denied error, you will need to close the Administration
module.
Refer to the documentation that came with your Documentum product and Visual Basic
documentation for assistance.
Kofax Technical Support
For additional technical information about Kofax products, visit the Kofax Web site at
www.kofax.com and select an appropriate option from the Support menu. The Kofax Support
pages provide product-specific information, such as current revision levels, the latest drivers and
software patches, online documentation and user manuals, updates to product Release notes (if
any), technical tips, and an extensive searchable knowledgebase.
The Kofax Web site also contains information that describes support options for Kofax products.
Please review the site for details about the available support options.
If you need to contact Kofax Technical Support, please have the following information available:
„
Kofax Capture software version
„
Documentum export connector version
„
Operating system and Service Pack version
„
Network and client configuration
„
Copies of your error log files
„
Information about your export connector