I fitting the pressure cuff – Panasonic EW-BW10W User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

For Batteries

• The frequency of use for batteries is approximately 300 measurements

(3 times per day) with fresh Panasonic alkaline batteries (AAA-size LR03

alkaline batteries). [Measurement conditions: Room temperature 73.4 °F

(23 °C); Pressurized to 170 mmHg; Wrist circumference: 6-3/4" (17 cm)]

• If batteries other than alkaline batteries are used or batteries are used

in a cold room, and when measuring a person with high blood pressure,

battery life may be dramatically shorter.
*Use alkaline batteries. (Panasonic Oxyride batteries can also be used.)

• Be sure to replace batteries once a year to prevent battery leakage.

I Fitting the Pressure Cuff

Blood pressure is measured at your left wrist. It is not necessary to roll up

your sleeve or to remove any clothing

Place the device

on the inside of

your wrist.

Wrap the pressure cuff so
that the positioning mark is
aligned with the base of the
wrist.

Fastener

Fastener

Place the device on the

inside of your wrist.

• Place the device directly in

contact with the skin.

• The device can be used by

people with a wrist

circumference of 5"-8-3/4"

(12.5-22.0 cm).

10

Advertising