Panasonic EW-BW10W - Manual (Page 15)

I Measuring Your Blood Pressure
FiSi Dis; ifisr
aaam
dgw
HR/f1R^SiS8
DIA.
•m^Bi
■|U| !► Pul;e
v_4
OFF/ON
S№KT
1. Place the arm to which the device is attached
on top of the storage case with the wrist
positioned at the level of the heart.
(Please see “Obtaining Accurate
Measurements” on pages 12 and 13.)
2. Press the Off/On Start button.
• The display will be lit up for approx. 2 seconds.
• Inflation will then begin automatically.
As measurements are being taken during
pressurization, operating sounds and the rate
of pressurization may change. This is perfectly
normal.
• The heart mark Y will begin to flash during
pressurization when the pulse is detected.
3. When measurements have been completed,
blood pressure and pulse rate are displayed.
• Pressure will automatically be released from the
pressure cuff.
• If your blood pressure is considered to be in the
hypertensive range, then the readings on the
display will flash for approx. 6 seconds.
• The M mark will be flash.
(Please see 19 for details regarding how to
record readings.)
• The pulse is estimated over the period of a
minute based on the pulse rate recorded when
measurements were being taken.
4. Press the Off/On Start button to turn off the
device.
• If you forget to switch the device off, it will do so
automatically after approx. 5 minutes.
IJgliil 14